Posts filed under ‘Postek’

Mindeo CS-3260 Cordless Laser Scanner


  • Runs on RF433 NHZ Technology
  • Coverage up to 200 meters
  • Fast scannning speed
  • Up to 160,000 scan per charge
  • Convenient plug & scan kit
  • Support master and client modes
  • Firmware updates via Flash ROM
Mindeo CS-3260 cordless laser barcode scanner combine superior data capture quality with ergonomic and rugged features to meet demands of Point-Of -Sales and any industrial application – Warehouse, Distribution Centre and Manufacturing Plants. The CS-3260 scanner’s 200 meter radio range capability provides a wide working area eliminating the restraints of cable devices, makes the workplace safer and more efficient.
Performance Characteristics
Light Source 650 nm visible laser diode
Decoding rate 100 times/sec
Laser classification Class 2
Min. element width 0.10mm (4mil)
Decode capability UPC-A, UPC-E, EAN-13, EAN-8,
ISBN/ISSN, Code 39, Code 39 full ASCII,
Interleaved 2 of 5, Industry 2 of 5, Matrix 2 of
5, Codabar, Code 128, Code 93, Code
11(USD-8), MSI/Plessey, UK/Plessey,
UCC/EAN 128, China Post, RSS-14
Indicator Visual, Audio
Operating mode Hand-held
Programming method Manual (reading special bar code)
Program upgrade Online
User Environment
Operating Temperature 0¡ãC to 45¡ãC (32¡ãF to 113¡ãF)
Storage Temperature 0¡ãC to 45¡ãC (32¡ãF to 113¡ãF)
Humidity 5% to 85%
Drop specifications 3.9-ft. (1.2-m) drops to concrete
Radio Specification
Range (direct line of sight) Up to 200m *
Radio link 433MHz adaptive frequency hopping
Electricity Characteristics
Input voltage 4.75V ¨C 6.5 VDC
Not charging 0 mA @5V
Fast rate charge 500 mA @5V
Slow rate charge 50 mA @5V
Standby Time Over 7 days
Read bar code per charge Over 160,000 scans per charge
Physical Characteristics
Dimensions 6.7 in. L x 2.8 in. W x3.3 in. D
(17 cm L x 7 cm W x 8.3 cm D)
Weight 199 g
Color: Deep Gray and Black
Battery: 1300 mAh Lithium-ion Battery
Charge time: Fully charged (100%) in 3.5 hours
Case material: ABS + PC

Untuk informasi lebih lanjut dapat menghubungi Roesy di 021-6401175/6400651




September 4, 2009 at 8:49 am

Mindeo MD2230 Barcode Laser Scanner


  • Auto-scanning mode
  • User-replaceable, single cable to host
  • Firmware updates via Flash ROM
  • Easy to program using the programming manual
  • Futuristic design, certainly catches your attention
  • Fast scanning speed and wider scanning field
MD2230 is an auto-trigger, single line laser bar code scanner designed for decoding all standard 1D bar codes. With the State-of-art scanning technology embedded inside, the MD2230 has a longer working range and wider scan field than a typical CCD scanner. Standard features like Auto-trigger scanning mode which scanner will automatically convert to autoscanning mode when place on the auto-scanning stand without further programming setting, furthermore it gives you the user-replaceable cable to host and user friendly programming manual.

  • POS Retail Management System
  • Manufacturing
  • Automotive Industry
  • Chemical Industry
  • Pharmaceutical Industry
  • Textile Industry
  • Electronics Industry
  • Telecommunication
  • Transportation and Logistics
  • Health-care Industry
  • Utilities Application
  • Government Application
Light Source Visible Laser Diode 650nm
Depth of Scan Field 30mm – 90mm for 4mil barcode
  30mm – 380mm for 12 mil barcode
Width of Scan Field 50mm @ 60mm, 32mm @ 30mm
Scan Speed 100 scan lines per second
Scan Method Single Scan Line Mode
Minimum Bar Width 0.1mm ( 4 mil )
Decode Capability Auto-discriminates all standard
  One-Dimension Barcodes
Interfaces Choice Keyboard PS2, USB and RS-232 interfaces
Print Contrast Minimum 25%
Indicator Green = ready, Red = Good Scan
Height 154mm ( 6.1” )
Width 67mm ( 2.64” )
Depth 95mm ( 3.74” )
Weight ( without cable ) 140 grams
Connector Type RJ-45 Phone Jack Connector
Cable Coil 2.0M
Input Voltage 5VDC +/- 0.25V
Operating Power 425mW
Standby Power 300mW
Operating Current 85mA
Standby Current 60mA
Laser Classifications Class 2
Operating Temperature 0 to 45 C ( 32 to 113 F )
Storage Temperature 0 to 45 C ( 32 to 113 F )
Humidity 5% to 85% ( non-condensing )
Durability 1.5M ( 5 ft ) multiple drops to concrete
Programming Method Programming Manual
Program update Firmware update via Flash ROM

ntuk informasi lebih lanjut dapat menghubungi Roesy di 021-6401175/6400651


September 4, 2009 at 8:44 am